  
SSL Certificates
|
|
SnowEx Tailgate Salt Spreader Model SP-575 Mini Pro
You are here:
home >
SnowEx Tailgate Salt Spreader Model SP-575 Mini Pro
|
|
click image to enlarge
|
|
SnowEx Tailgate Salt Spreader Model SP-575 Mini Pro
$1,511.76$1,281.96
Catalog Number: TX-SP575
SnowEx Tailgate Salt Spreader, Model SP-575 Mini Pro, is the ideal spreader when more control is needed in confined, narrow driveways that lead to parking lots.
CAPACITY: 5.75 Cu Ft and 360 lbs spreading material (4 1/2 bags of 80 lbs material)
FEATURES:
- Polyethylene Hopper: Eliminates corrosion!
- 12-volt Electric Drive/Transmission Sealed Unit - Assures low maintenance; no pulleys, no sprockets, no chains or belts!
- Variable Speed Dial Controller - Controls the spread width from inside the vehicle!
- 5.75 Cubic Foot Hopper - Offers 56% more capacity than the SP-375.
- Top Screen Standard - Prevents larger frozen chunks from entering hopper
- Warranty: 2 years including parts and labor with the option of an additional 3 years at a nominal charge
STANDARD MOUNTING KIT: Receiver Hitch Mount
OPTIONAL MOUNTING KITS:
-
UTM-175 Utility Mount - allows 2" receiver mount to be used for vehicles with flat mounting surface, such as dump beds, etc
-
TPM-175 3-Point Mount - allows 2" receiver mount to utilize the three point hookup on categories 0 and 1 on tractors
-
DRM-175 Drop Utility Mount - allows 2" receiver mount to be used and lowers receiver from bed to other flat surface
OPTIONAL ACCESSORIES: Gate Assembly Kit, Vibrator Kit, Adjustable Deflector - See Accessories
SPREADING MATERIALS:
- Bulk Salt with Vibrator Kit
- Peladow Calcium Chloride Pellets with Gate Assembly Kit
- Bagged Ice Melters
- Bagged Rock Salt
- Calcium Flake
Weight: 106 lbs
ADD TO CART
|
Specifications
Related Items
Accessories
- Body: Receiver mounted complete with 2" male receiver attachment and controls to spread dry, free-flowing material.
- Hopper: Overall hopper size is 32" H x 38" W x 18" D. Multi angle, easy flow design, high density polyethylene and UV protected
- Capacity: 5.75 Cu Ft
- Top Screen: 1/4" steel rod construction to prevent large material from entering hopper
- Weight: 106 lbs
- Spread Width: Up to 40'
- Amp Draw: Shall be no more than 12 to 15 amps under load
- Frame: Heavy duty modular steel with UV stabilized electrostatic powder finish
- Spinner: 10" diameter powder coated steel
- Motor: 1/3 hp, 12 volt DC, semi-sealed, direct drive coupled to an 8:1 ratio transmission mounted in a weather tight enclosure
- Transmission: Must be 8:1 ratio with bronze gear, filled with Aeroshell 33 grease (or equivalent). Meets Boeing Aircraft spec. #BMS-33-3. Useful temperature range: -100 to +250 degrees F
- Speed Controller: Variable speed dial controller with digital readout for spreading width and digital readout codes for troubleshooting, pulse feature to clear jams at the auger and auto 10 second shutoff cycle for overload protection. Blast feature switch and Anderson connector plugs at back of controller.
- Wiring Harness: Completely loomed non-combustible automotive style 10 gauge wire with Anderson high amperage connectors. Custom rubber molded weather tight plugs.
- Mount: 2" Receiver mount with locking hitch pin for easy on/off
|
 |  |
|